Abstract
A novel computational technique is presented for embedding mass-loss due to burning into the ANSYS finite element modelling code. The approaches employ a range of computational modelling methods in order to provide more complete theoretical treatment of thermoelasticity absent from the literature for over six decades. Techniques are employed to evaluate structural integrity (namely, elastic moduli, Poisson’s ratios, and compressive brittle strength) of honeycomb systems known to approximate three-dimensional cellular chars. That is, reducing the mass of diagonal ribs and both diagonal-plus-vertical ribs simultaneously show rapid decreases in the structural integrity of both conventional and reentrant (auxetic, i.e., possessing a negative Poisson’s ratio) honeycombs. On the other hand, reducing only the vertical ribs shows initially modest reductions in such properties, followed by catastrophic failure of the material system. Calculations of thermal stress distributions indicate that in all cases the total stress is reduced in reentrant (auxetic) cellular solids. This indicates that conventional cellular solids are expected to fail before their auxetic counterparts. Furthermore, both analytical and FE modelling predictions of the brittle crush strength of both auxteic and conventional cellular solids show a relationship with structural stiffness.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.