Abstract
The present study emphasizes on a comparative assessment of solar air heater (SAH) roughened with six different baffles viz. Transverse, inclined transverse, dimple, inclined dimple, arc and sine wave, using computational fluid dynamics (CFD) analysis. The comparison has performed to investigate the augmentation in the heat transfer and friction factor of SAH with different baffles. The CFD study has been accomplished by varying Reynolds number (Re) from 3000 to 18000 whereas, Relative roughness pitch (P/e=10) and Relative roughness height (e/Dh= 0.271) were kept fixed. Flow patterns by varying (Re), local and average Nusselt number, local and average friction factor, thermo-hydraulic performance (THP) have reported and elaborated. The computational results have verified by performing experiments on the same set of operating and geometric parameters. The deviation among numerical and experimental results of THP have found +11%, which are in acceptable range. The results reveals that the positioning and shape of baffle unswervingly affect the THP of the solar air heater. The maximum THP of 2.05 has been recorded with a sine wave shape baffles at Re = 15000. The sine wave baffle shape has judged as the best among the studied baffles on a given range of operating and geometric parameters.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
