Abstract
This study examines the performance of the ducted rotor in hover and edgewise flight conditions. The flow over a threedimensional model of a ducted rotor was simulated using the Spalart–Allmaras Reynolds-averaged Navier–Stokes model implemented in a stabilized finite element method. A sliding mesh was used to conveniently account for the large-scale motion associated with rotor revolutions. The simulation results were analyzed to understand the flow physics and quantify the contributions of the rotor and various sections of the duct interior surfaces on the total aerodynamic forces (thrust, drag, and side force) and moments (pitching and rolling). In edgewise flight, freestream flow separates off the front of the duct inlet, causing a region of recirculating flow and upwash in the rotor plane. The upwash region biases rotor thrust production to the front of the disk. The swirl velocity further biases the region of flow separation over the inlet and upwash at the front of the rotor toward the retreating side of the disk. The shift of thrust production on the rotor and duct toward the front produces a strong nose-up pitching moment on the ducted rotor. The rear of the diffuser is a significant contributor to the total drag; this force includes a nose-down pitch moment, which partially negates the moment from the duct inlet. The rotor is the primary source of vertical vibratory forces as well as vibratory pitching and rolling moments. The small tip clearance of the rotor causes a local interaction between the blade tip and duct that is the dominant contributor to in-plane vibratory forces on the ducted rotor.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.