Compressive Performance of Longitudinal Steel-FRP Composite Bars in Concrete Cylinders Confined by Different Type of FRP Composites.

Abstract

This paper presents an experimental study on the compressive performance of longitudinal steel-fiber-reinforced polymer composite bars (SFCBs) in concrete cylinders confined by different type of fiber-reinforced polymer (FRP) composites. Three types of concrete cylinders reinforced with (or without) longitudinal SFCBs and different transverse FRP confinements were tested under monotonic compression. The results showed that the post-yield stiffness of SFCBs is higher when confined with high elastic modulus carbon fiber-reinforced polymer (CFRP) composite than with low elastic modulus basalt fiber-reinforced polymer (BFRP) composite. Decreasing confinement spacing did not significantly improve the compressive strength of SFCBs in concrete cylinders. The compressive failure strain of SFCBs could possibly reach 88% of its tensile peak strain in concrete cylinders confined by CFRP sheets, which is significantly higher than the value (around 50%) in previous studies. Existing design equations, which applied a strength reduction factor or a maximum compressive strain of concrete to consider the compressive contributions of SFCBs in concrete members, underestimate the load-carrying capacity of SFCB-reinforced concrete cylinders. The design equation that considers the actual compressive stress of SFCBs gives the most accurate prediction; however, its applicability and accuracy need to be verified with more experimental data.