Compressing ultrafast electron pulse by radio frequency cavity**Project partially supported by the National Natural Science Foundation of China (Grant Nos. 51132004 and 11474096), the Fund from the Science and Technology Commission of Shanghai Municipality, China (Gant No. 14JC1401500), and the NYU-ECNU Institute of Physics at NYU Shanghai, China.

Abstract

An ultrafast electron diffraction technique with both high temporal and spatial resolution has been shown to be a powerful tool to observe the material transient structural change on an atomic scale. The space charge forces in a multi-electron bunch will greatly broaden the electron pulse width, and therefore limit the temporal resolution of the high brightness electron pulse. Here in this work, we design an ultrafast electron diffraction system, and utilize a radio frequency cavity to realize the ultrafast electron pulse compression. We experimentally demonstrate that the stretched electron pulse width of 14.98 ps with an electron energy of 40 keV and the electron number of 1.0 105 can be maximally compressed to about 0.61 ps for single-pulse measurement and 2.48 ps for multi-pulse measurement by using a 3.2-GHz radiofrequency cavity. We also theoretically and experimentally analyze the parameters influencing the electron pulse compression efficiency for single- and multi-pulse measurements by considering radiofrequency field time jitter, electron pulse time jitter and their relative time jitter. We suggest that increasing the electron energy or shortening the distance between the compression cavity and the streak cavity can further improve the electron pulse compression efficiency. These experimental and theoretical results are very helpful for designing the ultrafast electron diffraction experiment equipment and compressing the ultrafast electron pulse width in a future study.