Abstract
A comprehensive study is done for optimizing antireflection coatings at mid-infrared wavelengths around 3.4 μm for applications in semiconductor lasers. Different materials are tested for single and double layer coatings. The coatings are characterized by comparing the change in the threshold currents before and after coating the lasers. The change in the differential slope efficiency was used to estimate the loss in the coatings. The lowest value achieved for a single layer coating was 5% using aluminum oxide while a minimum value of reflectivity of 7 × 10−4 was achieved with a double layer coating of zinc selenide and silicon dioxide. The coatings' quality was tested using scanning electron microscopy and tape test. The study provides a comprehensive list of materials that can be used for antireflection coating applications in the mid-infrared region.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
