Comprehensive Mathematical Model for Simulating Electroslag Remelting

Abstract

Droplet formation and departure from an electrode tip affect the temperature distribution in liquid slag and a molten steel pool, as well as the removal of nonmetallic inclusions in the electroslag remelting process. In this article, magneto-hydrodynamics modules coupled with a volume of fluid (VOF) model (as described in VOF model theory) for tracking phase distribution have been employed to develop the electrode fusion model and to investigate formation and departure of a droplet from the electrode tip. Subsequently, the remelting rate and molten steel pool have been achieved based on the electrode fusion model. Results indicate that a droplet can increase the flow rate of liquid slag, especially the region of droplet fall through the slag pool; yet it has little impact on the flow distribution. Asymmetric flow can take place in a slag pool due to the action of the droplet. The depth of the molten steel pool increases in the presence of droplets, but the width of the mushy zone decreases. In addition, the shape of the electrode tip is not constant but changes with its fusion. The remelting rate is calculated instead of being imposed in this work. The development of the model supports further understanding of the process and the ability to set the appropriate operating parameters, especially for expensive and easy segregation materials.