Abstract
(In, Ga) alloy droplets are used to catalyse the growth of (In, Ga)As nanowires by molecular beam epitaxy on Si(111) substrates. The composition, morphology and optical properties of these nanowires can be tuned by the employed elemental fluxes. To incorporate more than 10% of In, a high In/(In+Ga) flux ratio above 0.7 is required. We report a maximum In content of almost 30% in bulk (In, Ga)As nanowires for an In/(In+Ga) flux ratio of 0.8. However, with increasing In/(In+Ga) flux ratio, the nanowire length and diameter are notably reduced. Using photoluminescence and cathodoluminescence spectroscopy on nanowires covered by a passivating (In, Al)As shell, two luminescence bands are observed. A significant segment of the nanowires shows homogeneous emission, with a wavelength corresponding to the In content in this segment, while the consumption of the catalyst droplet leads to a spectrally-shifted emission band at the top of the nanowires. The (In,Ga)As nanowires studied in this work provide a new approach for the integration of infrared emitters on Si platforms.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
