Abstract
Al-MoSexOy (un-doped and Al-doped MoSexOy) films are prepared by radio frequency (RF) magnetron sputtering, and influence of the Al doping contents on the structure, composition and optical properties of the Al-MoSexOy films has been studied. We find that the amount of the Al can modulate the Mo4+/Mo5+/Mo6+ composition ratios and tune the optical band gap of the Al-MoSexOy film. The concentrations of the higher molybdenum oxidation states (Mo5+, Mo6+) increase, and the value of the band gap increase from 1.86 to 2.90 eV with the increment of the Al doping contents. Back-gated field effect transistors (FETs) have been fabricated and investigated by utilizing the sputtered Al-MoSexOy film channel. The incorporation of the Al makes the ambipolar FET device based on un-doped MoSexOy channel into p-type FET. P-type conductive FET based on 5.2% Al-MoSexOy channel has the highest field-effect mobility (55.2 cm2 V−1 s−1) and preferable Ion/Ioff ratio (∼104).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
