Abstract
AbstractAnti‐corrosive composite cerium oxide/titanium oxide (CeO2/TiO2) thin films were successfully prepared on an AZ91D magnesium alloy substrate by applying cerium oxide (CeO2) thin films as the inner layer with a sol–gel process. Composition and surface morphology of the thin films were analyzed using X‐ray diffraction (XRD) and scanning electron microscope (SEM). XRD showed that the composite films consisted of cerianite and anatase phases. The wettability of the thin films was evaluated by water contact angles measurements. Potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) tests were used to evaluate the corrosion behavior of the bare substrate and coated samples in 3.5 wt% sodium chloride solution (3.5 wt% NaCl). The results demonstrated that titanium oxide (TiO2) thin film mainly dominated the corrosion resistance of samples and the composite films with excellent hydrophilicity could significantly improve the corrosion resistance of AZ91D magnesium alloy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.