Abstract
Vibration and welding characteristics of complex vibration ultrasonic welding systems of 27 and 40 kHz were studied. Complex vibration systems, which have elliptical to circular or rectangular to square locus, are effective for ultrasonic welding of various specimens including the same and different metal specimens, and for direct welding of semiconductor tips and packaging of various electronic devices without solder. The complex vibration systems consist of a one-dimensional longitudinal–torsional vibration converter with slitted part, a stepped horn and a longitudinal vibration transducer as a driving source. The complex vibration welding tips of 27 and 40 kHz have enough area of 6–8 mm square for various welding specimens. Aluminum plate specimens of 0.3–1.0 mm thickness were successfully joined with weld strengths almost equal to aluminum specimen strength, and independent to the specimen direction. Required vibration amplitude of 40 kHz is smaller than that of 27 kHz.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have