Abstract

Highly stable and active low-temperature CO oxidation catalysts without noble metals are desirable to achieve a sustainable society. While zero-dimensional to three-dimensional Co3O4 nanoparticles show high catalytic activity, simple-structured nanocrystals easily self-aggregate and become sintered during catalytic reaction. Thus, complex three-dimensional nanostructures with high stability are of considerable interest. However, the controlled synthesis of complex nanoscale shapes remains a great challenge as no synthesis theory has been established. In this study, 100 nm raspberry-shaped nanoparticles composed of 7–8 nm Co3O4 nanoparticles were synthesized by hydrothermally treating cobalt glycolate solution with sodium sulfate. Surface single nanometer-scale structures with large surface areas of 89 m2·g−1 and abundant oxygen vacancies were produced. The sulfate ions functioned as bridging ligands to promote self-assembly and suppress particle growth. The Co3O4 nano-raspberry was highly stable under catalytic tests at 350 °C and achieved nearly 100% CO conversion at room temperature. The addition of bridging ligands is an effective method to control the formation of complex but ordered three-dimensional nanostructures that possessed extreme thermal and chemical stability and exhibited high performance.

Highlights

  • IntroductionCarbon monoxide (CO), present in exhaust gases from combustion devices (e.g., automotive engines and boilers), poses a hazard to humans

  • Carbon monoxide (CO), present in exhaust gases from combustion devices, poses a hazard to humans

  • Shaped Co oxide nanoparticles were formed by synthesis without added ligands (Figure 2a,b)

Read more

Summary

Introduction

Carbon monoxide (CO), present in exhaust gases from combustion devices (e.g., automotive engines and boilers), poses a hazard to humans. The CO created by these combustion devices is converted to carbon dioxide (CO2) by an oxidation catalyst. Noble metals such as Pt, Au, and Pd supported on metal oxides show high CO oxidation activity in a wide temperature range [1,2,3,4,5,6,7]. Hu et al reported that Co3O4 nanobelts in which the {110} planes are predominantly exposed achieved 100% CO conversion at around 80 ◦C [13]. Tüysüz et al reported that Co3O4 nanoparticles without predominantly exposed crystal planes showed 100%

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call