Abstract
Owing to the lack of feasible fault modeling method, hard (open and short) faults, and discretized parametric faults are still the mostly used fault models. These models cannot characterize all soft (parameter shifting) faults because that the parameter of analog element be of continuity character. To address this concern, a complex field fault modeling method is presented first. If fault happens to passive element xi in linear analog circuit, the real (Ur) and imaginary (Uj) parts of faulty voltage phasor U°(U°=Ur+j Uj) must satisfy binary quadratic function Fi(Ur,Uj)=0, which is independent from the value of element xi and uniquely determined by its location and the nominal circuit under test. Hence, the binary quadratic function can model any continuous parameter shifting (soft) or hard fault. Second, to avoid calculating the explicit expression of binary quadratic function, a simulation-based method is given to obtain the locus of the change in the function Fz in the complex plane. Besides, the nominal (fault-free) point, the loci determined by the binary quadratic functions might intersect with each other. It is referred to as aliasing problem in this paper. This problem can be solved by adjusting the frequency of the input signal. Therefore, a constraint optimization method is proposed to select optimal test frequencies. The proposed test generation and compression methods, when combined with the complex field modeling method, can pinpoint much more fault components with less test points and frequencies when compared with the other methods.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Instrumentation and Measurement
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.