Abstract
To assess the accuracy of fit of complete-arch printed prosthesis prototypes generated with a digital workflow protocol for completely edentulous jaws. Forty-five edentulous jaws (35 patients) underwent intraoral complete-arch digital scans with the double digital scanning (DDS) technique and the generated standard tessellation language (STL) files were superimposed and imported into computer-aided design software. After STL merging, each master STL file was used for printing a prosthesis prototype. The primary outcome was the accuracy of fit assessment of the printed prototypes on verified master stone casts. Two experienced clinicians tested the accuracy of fit with radiographs and screw-resistance tests. Secondary outcomes were the effect of the scan body shape and implant number on the accuracy of fit. Out of the 45 DDS-generated prosthesis prototypes, 39 presented with accurate fit on verified master stone casts, yielding an 86.70% accuracy of fit. Cylindrical scan bodies led to 100% accuracy of fit (25/25), whereas polygonal scan bodies presented with 70% accuracy of fit (14/20). Four implant-supported prostheses yielded 100% accuracy of fit (12/12), compared with 25/29 (86.30%) accuracy of fit for the six-implant-supported ones. Fisher's exact test was used to assess the effect of different scan body shapes (p=0.005) and implant number on accuracy of fit. Chi-squared test was used to assess the association between the number of implants per arch and the accuracy of fit (p=0.039). Thirty-nine out of 45 complete-arch prosthesis prototypes generated with a completely digital workflow presented with clinically acceptable fit. The effect of the scan body design and implant number was statistically significant, favoring cylindrical scan bodies and four-implant-supported prostheses.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have