Abstract
New types of process fluids is very broad. Drilling with constant feed force represents the experiment that follows different properties and effects in machining. The main aim of this scientific paper is to assess the speed of drilling holes by the drilling technology-constant feed force- with the drilling cutting tools made of uncoated high speed steel. Eleven different process fluids were compared used the during the experiment. There were compared eleven different process fluids. In the context of the thesis more process fluids from global suppliers have been tested. In the process of experiments there were used twist drills of high speed steel type HSS, CSN 221121, o 8 mm, without coating. Steel samples were 16MnCr5, according to EN 10084-94. During the experiment there was used drilling of holes by hand feed drill machine V 20 that was modified with the mechanical switch and there was also stopwatch. Testing of process fluids in chip machining has been going on at the Department of machining and assembly of the Technical University of Liberec for many years.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
