Comparison of selected parameters of automated milking in dairy cattle barns equipped with a concentrate feeding system

Abstract

Automatic milking systems (AMSs) give cows relative freedom to choose the time and frequency of milking throughout the day. Feeding stations also may improve the management of farms. Combining milking robots and feeding stations (FS) may improve milking efficiency and milk yield. Therefore, combining AMS and FS may be beneficial for farmers. The objective of the research was to compare selected automatic milking parameters (daily indices per cow) registered by an AMS in relation to selected features including the presence of concentrate feeding stations. We analysed 931 cows born in 2013–14, in lactations 1–8. In total, we collected data from 357 318 milking days. The following parameters were examined: milking frequency (n/24 h), number of rejected milking (n/24 h), the average number of nipple attempts (n/milking), milking speed (kg/min), time spent in the milking box (s/24 h), milk yield (kg/24 h), milking efficiency (kg/min), rumination time (min/24 h), and concentrate intake (kg) per 100 kg of milk produced. The statistical analysis was conducted using a multi-factor analysis of variance. The analysis confirmed a statistical effect of the concentrate feeding system on most of the investigated traits, except for nipple attempts, box time and rumination time. In cows in barns with an FS, the following parameters were statistically higher compared to cows in non-FS barns: milking frequency (3.04 vs 2.73n/24 h), number of rejected milking (2.24 vs 1.51n/24 h), milking speed (2.98 vs 2.64 kg/min), milk yield (33.48 vs 30.14 kg/24 h), milking efficiency (1.80 vs 1.67 kg/min), and concentrate intake per 100 kg of milk produced (14.67 vs 12.67 kg). The study results indicate that using feeding stations in combination with an AMS can increase milking efficiency, hence the milk output from a milking robot.