Comparison of fabric properties knitted by pin spacer compact and conventional compact yarns

Abstract

This study examined the influence of pin spacer apparatus attachment on compact yarn quality parameters and physical properties of knitted fabrics manufactured using those 100% cotton compact yarns. Two groups of compact yarns were spun on regular compact yarn spinning frame with and without addition of pin spacer apparatus which is placed at the end of the drawing unit of regular compact yarn spinning frame. Totally eight yarns were spun at four different yarn number levels (Ne 24/1, Ne 30/1, Ne 36/1 and Ne 40/1) and two different spinning conditions (with and without pin spacer apparatus). Spun yarn types were then knitted on the industrial sized plain knitting machine. Knitted fabrics were used in the greige and dyed form to evaluate their bursting strength (kPa), dimensional change, abrasion related mass loss (%), pilling resistance, air permeability (mm/s) and colour difference. Test results were then statistically evaluated and influence of pin spacer attachment on yarn quality parameters and fabric properties was determined. In the frame of this experimental work, attachment of pin spacer apparatus improved compact yarn characteristics especially at yarn evenness, imperfection and hairiness values. In case of knitted fabric properties, it was found that pin spacer apparatus attached compact yarn utilization significantly improved air permeability properties of knitted fabrics.