Abstract
This study investigated the differences between knitted fabrics made from compact and conventional ring-spun yarns. 100% cotton yarns, produced from the same cotton blend, were spun according to compact and conventional ring spinning principles in two different yarn counts and twist factors. Three different knitting structures, i.e., interlock, rib and single jersey, were produced from these yarns. The physical properties of these fabrics were investigated and compared with each other before and after the reactive dyeing process. When the results were examined, it was found that the hairiness of compact yarns was less and the strength and elongation percentages were higher, the fabrics produced with compact yarns showed less tendency to pilling and had a higher bursting strength. No statistical differences were observed with regard to spirality, weight, abrasion resistance, color efficiency and rubbing fastness of the fabrics produced with compact and ring-spun yarns.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.