Comparing Study on Formation of Large Discharge Currents in Atmospheric Pulse-Modulated Radio Frequency Discharges

Abstract

In recent years, pulse-modulation is introduced in atmospheric radio frequency (RF) discharges to further control the discharge operation. In this article, a comparing study is performed by a 1-D fluid model to investigate the formation of large discharge currents (LDCs) in the first RF cycle during the power-on phase in an atmospheric pulse-modulated RF discharge controlled by dielectric barriers. The current–voltage characteristics and helium metastable (He*) distributions show the enhancement of a pulsed voltage on the ignition of RF discharge, which agrees well with the experimental observation. On the other hand, in a dielectric barrier discharge driven by a sinusoidal voltage of 500 MHz, double LDCs are observed in the positive and negative half-cycles, respectively, and the large pulse rise rate of applied voltage essentially influences the distribution of charged particles in the first cycle during the power-on phase. In this study, according to computational data the reverse electric field near the anode contributes greatly to the generation of LDCs in both types of discharge, and the appropriate discharge conditions are suggested to optimize the pulse-modulated RF discharges in applications.