Abstract
DICOM specifies that digital data values should be linearly mapped to just-noticable differences (JNDs) in luminance. Increasing the number of JNDs available requires increasing the display's dynamic range. However, operating over too wide a range may cause human observers to miss contrast in dark regions due to adaptation to bright areas or, alternatively, miss edges in bright regions due to scattering in the eye. Dolby Inc.'s high dynamic range (HDR) LCD display has a maximum luminance over 2000 cd/m2; bright enough to produce significant in-eye scatter. The display combines a spatially variable backlight producing a low-resolution 8-bit ldquobacklight imagerdquo with a high-resolution 8-bit LCD panel, approximating a 16-bit greyscale display. Alternatively, by holding the backlight constant at 800 cd/m2, a standard medical LCD display can be simulated.We used two-alternative forced choice (2AFC) signal-detection experiments to quantify display quality. We explored whether the full-power HDR display's optical characteristics (scattering and low resolution backlight) have a negative effect on signal detection in medical images compared with a standard LCD. We used 8-bit test images derived from high-field MRI data combined with synthetic targets and synthetic Rician noise. We suggest signal detection performance with the HDR display is comparable to a standard medical LCD.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.