Abstract
ABSTRACT This research attempts to evaluate the efficiency of the two main arsenic removal processes, i.e. Fe(III) coagulation and iron oxy-hydroxides adsorption, by combining laboratory-scale experiments and results from operating full-scale water treatment units, located in several places of Greece. The proposed experimental procedure showed that the removal ability of Fe(III) coagulation is proportional to the added iron salt dose and appears to be much more efficient than the adsorption process applied in columns filled with iron oxy-hydroxide solid media. Furthermore, the comparison with the results obtained from large-scale water treatment plants indicated the possibility to predict the required quantities of chemicals’ addition, or adsorbents in scaling-up the laboratory or pilot-scale systems, respectively. However, apart from the effectiveness of each method, the variation in water flow rates, the residual arsenic concentrations, and the specific requirements for operation and maintenance should ...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.