Comparative Studies between Phasor Measurement Units (Synchrophasors) & SCADA System

Abstract

bstract: The increasing demand of load without considerable increase in transmission resources has posed numerous constraints and challenges in the power system monitoring and performance. Modern power system grid monitoring tools use data from remote terminal units (RTUs), protective relays, and transducers to provide information to system operators. This information is vital for the operation of the power system on a daily basis and under system contingencies. However, the method presently available to retrieve data from the devices is asynchronous and relatively slow. The asynchronous nature of the data does not provide accurate angle difference information from two nodes on the network. Moreover, the low data rate may be too slow to capture many short-duration disturbances on the grid. Alternatively, Synchrophasors based technology can be used to provide high-speed and coherent real-time information of the power system that is not available from legacy supervisory control and data acquisition (SCADA) systems.