Abstract
This paper presents a comparative analysis of textile antenna using different feeding techniques for Global Positioning System (GPS-L1) application. Textile materials which are commonly used in the wearable application has gained much attention due to the flexibility and conformability characteristic of the antenna. Nevertheless, the flexibility of this antenna will introduce the bending and stretching element to its physical structure that may degrades the performance. To ensure the maximum power transfer takes place takes place between the source and the antenna, a suitable feeding method must be identified. In this paper, the microstrip feedline technique and coaxial feeding technique will be studied comparatively using Felt textile material as the substrate with the relative permittivity, ?r of 1.098 and tangent loss, ? of 0.0395. It is attached to a copper tape which act as the conductive material with thickness of 0.035 mm. Using Computer Simulation Technology (CST) Microwave Studio software, the result will be analysed comparatively from the performance validation in return loss, gain, bandwidth, directivity and radiation pattern
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Engineering & Technological Advances
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
