Comparative analysis of pinewood, peanut shell, and bamboo biomass derived biochars produced via hydrothermal conversion and pyrolysis

Abstract

Biochars were produced from pinewood, peanut shell, and bamboo biomass through hydrothermal conversion (HTC) at 300 °C and comparatively by slow pyrolysis over a temperature range of 300, 400, and 500 °C. These biochars were characterized by FT-IR, cation exchange capacity (CEC) assay, methylene blue adsorption, as well as proximate and elemental analysis. The experimental results demonstrated higher retained oxygen content in biochars produced at lower pyrolysis temperatures and through HTC, which also correlated to the higher CEC of respective biochars. Furthermore, all types of biochar studied herein were capable of adsorption of methylene blue from solution and the adsorption did not appear to strongly correlate with CEC, indicating that the methylene blue adsorption appears to be dependent more upon the non-electrostatic molecular interactions such as the likely dispersive π–π interactions between the graphene-like sheets of the biochar with the aromatic ring structure of the dye, than the electrostatic CEC. A direct comparison of hydrothermal and pyrolysis converted biochars reveals that biochars produced through HTC have much higher CEC than the biochars produced by slow pyrolysis. Analysis by FT-IR reveals a higher retention of oxygen functional groups in HTC biochars; additionally, there is an apparent trend of increasing aromaticity of the pyrolysis biochars when produced at higher temperatures. The CEC value of the HTC biochar appears correlated with its oxygen functional group content as indicated by the FT-IR measurements and its O:C ratio.