Comparative Analysis of Partitioned Stator Flux Reversal PM Machines Having Fractional-Slot Nonoverlapping and Integer-Slot Overlapping Windings

Abstract

This paper proposes a new partitioned stator flux reversal permanent magnet (PM) (PS-FRPM) machine having integer-slot overlapping windings, i.e., the slot number per pole per phase q is an integer, based on the magnetic gearing effect in stator-PM machines. Compared with the existing PS-FRPM machine with fractional-slot nonoverlapping windings, a more sinusoidal armature reaction magnetomotive force can be achieved in the proposed PS-FRPM machine with integer-slot overlapping windings, resulting in lower iron loss and PM loss. Electromagnetic performance of the PS-FRPM machine, which has q = 1 overlapping windings is analyzed and compared with PS-FRPM machine, which has q = 0.5 nonoverlapping windings by finite element (FE) analysis. FE results show that the proposed 24/10/12-outer-stator/rotor/inner-stator-pole PS-FRPM machine with q = 1 overlapping winding exhibits higher fundamental phase back-electromotive force, higher average electromagnetic torque and lower torque ripple, lower loss and higher efficiency, higher self-inductance but lower mutual inductance, higher d -axis inductance, and potential infinite flux-weakening capability compared with the 12/10/12-outer-stator/rotor/inner-stator-pole PS-FRPM machine with q = 0.5 nonoverlapping windings. Both prototype machines with q = 1 overlapping winding and q = 0.5 nonoverlapping windings are built and tested to verify the FE analyzes.