Compact high‐linearity, high‐efficiency complementary metal–oxide–semiconductor power amplifier with post‐distortion lineariser for wireless local area network and Wireless Gigabit Alliance applications

Abstract

Listen

Translate article

This study proposes a post-distortion linearisation technique for 5 and 60 GHz complementary metal-oxide-semiconductor (CMOS) power amplifiers (PAs). The technique improves the output 1 dB gain compression point (OP 1dB ) and power-added efficiency (PAE) of the PA when the lineariser is turned on. The 5 GHz PA that is fabricated in tsmc TM 0.18 μm CMOS achieves a 16.3 dB gain, a 20 dBm OP 1dB and a 32.6% PAE. The linearised 5 GHz PA improves the OP 1dB and PAE by 2.3 dB and 3.2% as compared to the PA without lineariser. The difference between the OP 1dB and saturated power ( P sat ) is <;0.2 dB. The 60 GHz PA was implemented in a 90 nm CMOS process with a chip area of 0.57 mm 2 . The PA achieves a 14.8 dB gain, a 16.8 dBm OP 1dB with a 16.3% PAE and a 15 GHz 3 dB bandwidth. The power difference between the OP 1dB and P sat is <;0.3 dB. The linearised 60 GHz PA improves the OP 1dB and PAE by 3.2 dB and 5.8% as compared to the PA without lineariser.