Abstract
We presented a silicon microring resonator based on thin film silicon nitride waveguide for biosensor applications. Design and fabrication were conducted. The device was fabricated on a silicon nitride wafer with 250 nm top film on 3 μm buried oxide by using electron-beam lithography and inductively coupled plasma etching. The radius of the microring is as smaller as 50 μm. The quality factor of the resonator is 8610. The spectra and resonance shift for bulk sensing were measured by flowing sodium chloride solutions with different concentrations on the surface of the sensor. The sensitivity and the LOD of the sensor are 384.58 nm/RIU and 4.68×10−4 RIU, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.