Abstract
The current work aims at characterizing the premixed charge compression ignition (PCCI) combustion with regression-based approach using response surface methodology. PCCI operating parameters such as load, pilot injection timing, main injection timing, pilot injection quantity, exhaust gas recirculation and injection pressure are considered as input variables. Engine performance indicators such as brake thermal efficiency, brake specific fuel consumption, carbon monoxide (CO), hydrocarbon (HC), oxide of nitrogen (NOx), smoke emissions, combustion phasing and combustion noise metric ringing intensity are considered as output responses. Experimental results validate the optimal solution from response surface methodology approach, and good agreement is found between mathematical models and experimental results. Comparative examination of optimized PCCI combustion versus conventional combustion showed a 66% and 44% decrement in NOx and smoke emissions. Except for CO and HC emissions, the percentage penalty of other responses with PCCI combustion is less than 10%. In addition to ringing intensity another combustion noise metric combustion noise level is computed from Fast Fourier Transform (FFT) analysis of cylinder pressure trace. A combustion noise level of 73.26 dB is obtained at optimized conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.