Abstract
AbstractThe combustion characteristics of high burn rate azide polymer composite propellant were examined by using a chimney type strand burner, a Ø 80 mm × 140 mm small rocket motor and a L/D = 16 of Ø 70 mm heavy‐wall rocket motor. The propellant, BAMO/NMMO copolymer was used as a fuel binder and AP as an oxidizer, burned approximately 29 mm/s at a pressure range of 7 MPa to 20 MPa with a plateau‐mesa burning behavior. However, the pressure exponent rapidly increased at above the pressure of 20 MPa and was 0.52 between 20 MPa and 25 MPa. The low pressure exponent and high burn rate of the azide polymer propellant are suitable to the short burn time at the maximum expected operating pressure range of 15 MPa to 20 MPa. The high L/D heavywall rocket motor with volumeric mass fraction of 83% showed stable combustion without any pressure oscillation and severe erosive burning. The average burn rate in the high L/D motor was 10% larger than that estimated from the strand data. The theoretically calculated pressure‐vs‐time and thrust‐vs‐time curves were well consistent with the measured data. α = 20 and β = 180 for the Lenoir‐Robillard equation were used to estimate the burn rate.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call