Abstract
Abstract The combustion generated soot contamination effect on a single diesel droplet ignition and burning was investigated experimentally for the first time. Diesel droplet flame was used to contaminate the droplet to be investigated prior to ignition. Distinct differences in lifetime and stability of the burning of the neat and contaminated droplet samples were observed in their heating, boiling and disruptive phases. For a soot-contaminated droplet surface, the evaporation rate became weaker as a result of slower mass transfer thus contracted the flame formation. Contrary to the burning rate enhancement of droplet with stable and uniform suspension of particles observed by other researchers, the slightest contamination of soot particles in a fuel droplet surface can significantly reduce the burning rate. Denser agglomeration of soot can form a shell on the droplet surface which blocks the flow of gas escaping through the surface thus distort the droplet even further. At late combustion stage, bubbles are observed to rapture on the surface of the soot-contaminated droplet. Strong ejections of volatile liquid and vapour that would explode shortly after parting from the droplet are observed. It seems that the explosion and burning of ejected mixture have little interactions with the enveloped flame surrounding the primary droplet. Enhanced visualisation of droplet liquid-phase has clearly indicated the cause of declining trend in the burning rate and flame stand-off ratio of soot-contaminated diesel droplet. These insights are of significance for understanding the effect of fuel droplet contamination by combustion generated soot particles.
Accepted Version (
Free)
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call