Abstract

Oxy-fuel combustion technology has been recognized as one of the promising ways for cost-effective CO2 capture. The co-combustion characteristics of flax straw biomass/bituminous coal mixture (FS/BC) and flax straw biomass/sewage sludge mixture (FS/SS) under air, oxy-fuel (21%/79% O2/CO2) and oxygen-enriched oxy-fuel (30%/70% and 40%/60% O2/CO2) conditions were investigated in the vertical tube reactor. In particular, the study focused on the burning characteristics, the effect of blending ratio, and flue gas emissions. The findings indicated that flax straw biomass exhibited superior ignition performance compared to its blends with sewage sludge and bituminous coal. A higher O2 concentration from 21% to 40 led to a reduction in ignition delay time by 4s at 850 ℃ and by up to 10s at 950 ℃. Moreover, char combustion time was reduced by 50% for FS/SS blends due to the lower fixed carbon content compared to FS/BC blends. Additionally, increasing the O2 concentration resulted in lower emissions of CO by ∽40% and N2O by ∽45% for both blends. However, this also led to a slight increase in SO2 and NO emissions by ∽15% and ∽26%, respectively. The optimal conditions for the tested samples in oxy-fuel environment were found to be 30% O2/70 CO2, which enhanced combustion performance while lowering flue gas emissions.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.