Abstract

A series of La+Nb co-doped TiO2 (La0.5Nb0.5)xTi1-xO2 (0.25% ≤ x ≤ 5%) ceramics were prepared using a solid-state reaction method. Colossal permittivity (CP) (εʹ > 104) and low dielectric loss (tanδ < 0.05) were obtained when the ceramics were sintered at 1673 K in an N2 atmosphere and annealed at 1073–1173 K in air. A pure rutile phase was achieved when x = 0.25% and secondary phase La2TiO5 was detected when x ≥ 0.5%. The optimum dielectric performance of εʹ > 104 and tanδ < 0.05 within 1 Hz–2 MHz and 25–350 K was obtained for x = 0.5%. Three types of dielectric relaxations were observed through the dielectric-temperature spectrum: electron-pinned defect-dipoles (EPDD) polarization, electron hopping, and Maxwell–Wagner polarization. The CP (> 25 K at 1 kHz) was primarily related to EPDD polarization. The high activation energy of the grain boundary (Egb = 1.98 eV) is one of the reasons for the low tanδ in this study.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.