Abstract
The mode-I interlaminar fracture toughness of composite laminates under different loading rates can be measured by the double cantilever beam (DCB) test. It is observed from the DCB test of a unidirectional PEEK/carbon composite laminate that as the loading rate increases from quasi-static to dynamic range: (1) delamination crack growth exhibits a transition from stable to unstable (“stick/slip”) and back to a stable type; (2) the interlaminar fracture toughness is not constant as the loading rate increases. In this paper, two numerical approaches are used to reproduce the experimental observations: a cohesive zone model (CZM) and the interfacial thick level set (ITLS) model. CZM simulations with rate-independent and rate-dependent cohesive laws are carried out. A new version of the ITLS is introduced with a phenomenological relation between crack speed and energy release rate. The simulation results of the CZM and the ITLS model are compared with the real DCB test data to evaluate the capability of these two types of models. It is found that the used CZM can reproduce rate-dependence of the fracture energy, but not the stick/slip behavior. The ITLS can capture the stick/slip behavior, but needs different parameter sets for different loading rates.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.