Abstract

Clay minerals are the signature of hydrothermal alterations related to fluid circulation in volcanic and crystalline rocks. In the French part of the Upper Rhine Graben, in the deep-seated granites, illitic minerals (illite and I/S mixed layers (ml)) are typical products of the structurally-controlled argillic alteration in the Paleozoic granitic basement. In the new Illkirch geothermal well, GIL-1, drill-cuttings were studied with various petrographic methods to determine the characteristics of illite in paleo- and present-permeable zones, and to compare the alteration mineralogy with that of geothermal Soultz-sous-Forêts and Rittershoffen sites. Alteration petrography, crystal structure as well as the chemical composition of the illitic minerals and the altered bulk rocks were performed all along the well. This complete characterization, combined with geophysical logs and structural results, highlighted that the illitic minerals at Illkirch, Soultz-sous-Forêts, and Rittershoffen are composed of illite and illite-rich illite-smectite mixed layers (I/S ml) (<10% smectite). Two mineralogical assemblages were distinguished: chlorite + illite resulting from the propylitic alteration after the emplacement of the granitic basement under temperatures higher than 350 °C, and illite + I/S ml + carbonates + quartz resulting from the argillic alteration due to fluid circulation in the fractures at temperatures between 130 and 160 °C. Fracture zones are characterized by the occurrence of illitic minerals (illite and I/S ml), and specifically, by higher quantities of I/S ml in present-day permeable zones than in paleo-permeable zones. A conceptual model of the fracture zones at the interface between the overlying sedimentary rocks and the granitic basement is proposed. The present-day permeability distribution is controlled by the fault and fracture network, which consists of sealed zones and unsealed zones. Fluid convection in the URG implies paleo and present fluids circulating in both fractured sedimentary and crystalline reservoirs. Such circulations develop illitic minerals that could be considered as exploration guides for future geothermal sites in the URG. At Illkirch, the repartition of the present-permeable fracture zones (KFZs) in the GIL-1 well indicates that the moderately argillically altered granite distally situated from the Eschau fault is more permeable than the intensely argillically altered granite close to the Eschau fault.

Highlights

  • Geothermal energy is one of the best compromises in terms of low CO2 emissions among the renewable energy sources [1,2]

  • Illite and illite-rich illite/smectite mixed-layers constituting both the illitic minerals mentioned in this paper, are typical secondary minerals resulting from the hydrothermal alteration of Al-bearing primary minerals in granites such as feldspars and ferro-magnesian minerals [13,16,17]

  • Our findings show that the granitic basement, the hydrothermal alteration products, and the fluids circulating in the fractures/fault networks at Illkirch are similar to those at Soultz-sous-Forêts and Rittershoffen

Read more

Summary

Introduction

Geothermal energy is one of the best compromises in terms of low CO2 emissions among the renewable energy sources [1,2]. Even if stimulations could contribute to enhance the initial permeability after drilling operations, thereby developing viable enhanced geothermal system (EGS) projects like the Rittershoffen wells [4], the remaining challenge is the implementation of drilling in zones with the best reservoir quality This requires an understanding of why some fractured zones hosted in granites are more permeable than others. Several geothermal sites in the URG that have been studied in detail in terms of secondary mineralogy (Soultz-sous-Forêts, Rittershoffen) have reported the occurrence of illitic minerals systematically associated with fracture zones and their damage zones [18,24,25,26]. To meet the above objectives, we utilized the following analytical techniques: binocular observations, chemical analyses on bulk rock, x-ray diffraction (XRD), and chemical composition of clay minerals as well as geophysical logs such as temperature log, borehole image log, and gamma-ray (GR)

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call