Abstract
Chitosan hydrogel beads (CHB) and cross-linked CHB functionalized with tricarboxylic citric acid (CA-GLA-CHB) were synthesized and used for the removal of Cr(VI) from aqueous solutions in batch and dynamic adsorption systems. Applicability of COMSOL Multiphysics software as a tool for predictive modelling of column dynamics using a minimum set of experimental parameters was tested and compared with experimental results. Batch experiments demonstrated that CA-GLA-CHB showed almost 20% higher adsorption capacity and wider operational pH range compared to non-functionalized CHB. In a dynamic system, CA-GLA-CHB was used as column packing material and the column dynamics was investigated at different conditions. The breakthrough and exhaustion time of the column increased with an increase in bed height and a decrease in feed flow rate and initial Cr(VI) concentration. Computational modeling by COMSOL software with implemented Advection-Dispersion-Reaction (ADR) equation was used to simulate breakthrough curves for the applied dynamic system in order to validate the possibility of its application for process design in the scaled-up fixed-bed column systems for wastewater treatment. The simulated breakthrough curves of Cr(VI) adsorption matched well with the experimental, thus proving that COMSOL Multiphysics software can be used for scaling-up fixed-bed column systems packed with low-cost and effective CA-GLA-CHB bioadsorbent.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
