Abstract
In this study, chitosan is obtained from the waste shells of crayfish ( Astacus leptodactylus) and characterized. The crayfish chitosan was coated on cotton fabrics using the padding-drying method. The surface properties, flammability and water and air permeability properties of these coatings based on chitosan and a combination of chitosan and nano-TiO2 were determined. The weight of green calico fabric increased to 24.76% after coating with chitosan, while the weight of the blue dyed denim fabric increased to 5.19%. The chitosan coating increased the tear strength of the calico fabric by 20% in the weft direction. Thermogravimetric analysis and vertical burning tests show that chitosan improves the thermal resistance and flame retardancy performance of denim fabrics. While the amount of residue due to thermal degradation of the blue dyed denim fabric was 16.78%, it increased to 34% after coating with chitosan+nano-TiO2. The chitosan coating reduced the mass loss caused by thermal degradation in green calico fabric from 86.3% to 66.0%. Chitosan also improved the post-flame combustion performance of fabrics. While the ember burning time is decreased to 6s in the chitosan-coated dyed calico fabric, this did not occur in the chitosan+nano-TiO2-coated dyed denim fabric.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.