Abstract
Abatract The chemical recycling of crosslinked poly(methyl methacrylate) wastes, PMMA, used as dental resins, was investigated for recovery and polymerization of the methyl methacrylate monomer, MMA. At temperatures of 400 °C in laboratory and pilot plant installations, PMMA could be depolymerized by pyrolysis to produce more than 90 wt% of liquid, containing more than 98 wt% of MMA. Gas chromatography (GC) and coupled gas chromatography – mass spectrometry (GC–MS) analyses were carried out to characterize the obtained liquid fraction. PMMA powders produced with different quantities of recycled MMA were prepared, after purification of the liquid through distillation, leading to polymer resins with properties that were similar to the ones obtained with virgin commercial MMA, as characterized by particle size, Fourier transform infrared (FT-IR), gel permeation chromatograph (GPC) and scanning electron microscopy (SEM) analyses.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
