Abstract
Chemical industrial kilns were found to be used for waste treatment, however it is still in the research stage. In our study, field tests were conducted to find the emission and distribution characteristics of polycyclic aromatic hydrocarbons (PAHs) during co-processing of hazardous waste in an industrial scale coal-water slurry gasifier (CWSG), which is applied to ammonia production. Changes of temperature, pressure and gas production of CWSG were recorded under both blank condition (i.e., regular production) and test condition (i.e., feedstock mixed with hazardous waste). Concentration of PAHs in all the solid waste, waste water, and exhaust gas under two conditions were analyzed. Results showed that co-processing of hazardous waste has little impact on the operation stability of CWSG, the temperature were ranged at 1330–1350 ℃ in CWSG, the pressure and gas production were stabled at 1.0–1.3 MPa and 12,000–14,000 Nm3/h respectively. Low environmental risks of PAHs in regular production and weren’t increased by the addition of hazardous waste. Distribution trends of PAHs with different molecular weights in solid-liquid-gas three phases were basically the same under both two conditions. 92.96 %−93.68 % low molecular weights (LMW, 2–3rings) PAHs distributed in exhaust gas, 50.84 %−71.66 % middle molecular weights (MMW, 4 rings) PAHs distributed in solid waste, and 85.3 %−86.77 % high molecular weight (HMW, 5–6 rings) PAHs distributed in solid waste, while the content of PAHs in waste water was generally low.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call