Abstract
In this work, we use a novel methodology to analyse how the critical compositional variables of MgOC bricks affect their chemical degradation by oxygen attack; the study focuses on the effect of the graphite content, the presence of aluminium, and the binder type. Oxidation tests are performed at 1000 °C, a typical preheating condition for steelmaking ladles, under two atmospheric conditions: one simulated the oxygen concentration in air, and the other, with a lower amount of oxygen, reproduces the conditions of the inner part of the brick when liquid steel is present. It was found that: a) the addition of Al reduces the carbon oxidation kinetic, mainly at a low O2 partial pressure, b) increasing the graphite content led to a smaller decarburized area with higher O2 consumption, and c) mixing CarboRes® with phenolic resin resulted in a higher O2 consumption but at a slower oxidation rate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.