Abstract
The aim of this study was to characterize the primary carbides formed in as-cast H13 steel. The composition, morphology, type, and size of primary carbides in as-cast H13 steel were investigated by optical microscope (OM), field emission scanning electron microscopy (FE-SEM), electron back-scattered diffraction (EBSD), and X-ray diffraction (XRD) analysis. The number of primary carbides was investigated by ASPEX automated inclusion analysis system. The results indicated that primary carbides in as-cast H13 steel are mainly composed of Cr, Mo, V, and Ti, and there exist four kinds of primary carbides in the interdendritic zones of H13 steel, which are stripy Mo–Cr-rich M2C, eutectic Mo–Cr-rich M2C, V-rich MC, and V-rich MC with Ti and N. Thermodynamic calculation indicated that M2C precipitates in liquid phase at solid fractions larger than 0.99, while MC precipitates in liquid phase at solid fractions larger than 0.96. Statistical results indicated that the number of M2C is much greater than the number of other kinds of primary carbides. Most primary carbides are blocky, with lengths of no more than 10 μm and a length/width ratio of no more than 3. The large primary carbides in as-cast H13 steel are mainly M2C.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Minerals, Metallurgy, and Materials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
