Chemical and physical properties of iron hydroxide precipitates associated with passively treated coal mine drainage in the Bituminous Region of Pennsylvania and Maryland

Abstract

Changes in precipitate mineralogy, morphology, and major and trace element concentrations and associations throughout 5 coal mine drainage (CMD) remediation systems treating discharges of varying chemistries were investigated in order to determine the factors that influence the characteristics of precipitates formed in passive systems. The 5 passive treatment systems sampled in this study are located in the bituminous coal fields of western Pennsylvania and northern Maryland, and treat discharges from Pennsylvanian age coals. The precipitates are dominantly (>70%) goethite. Crystallinity varies throughout an individual system, and lower crystallinity is associated with enhanced sorption of trace metals. Degree of crystallinity (and subsequently morphology and trace metal associations) is a function of the treatment system and how rapidly Fe(II) is oxidized, forms precipitates, aggregates and settles. Precipitates formed earlier in the passive treatment systems tend to have the highest crystallinity and the lowest concentrations of trace metal cations. High surface area and cation vacancies within the goethite structure enable sorption and incorporation of metals from coal mine drainage-polluted waters. Sorption affinities follow the order of Zn > Co ≈ Ni > Mn. Cobalt and Ni are preferentially sorbed to Mn oxide phases when these phases are present. As pH increases in the individual CMD treatment systems toward the pH pzc of goethite, As sorption decreases and transition metal (Co, Mn, Ni and Zn) sorption increases. Sulfate, Na and Fe(II) concentrations may all influence the sorption of trace metals to the Fe hydroxide surface. Results of this study have implications not only for solids disposal and resource recovery but also for the optimization of passive CMD treatment systems.