Abstract
We studied the effect of annealing temperature on the physical properties of WO3thin films using different experimental techniques. WO3has been prepared by hot-filament metal oxide deposition (HFMOD). The films, chemical stoichiometry was determined by X-ray photoelectron spectroscopy (XPS). The monoclinic single-phase nature of the as-deposited films, structure was changed to triclinic structure by annealing them at higher temperatures than 400°C, which has been determined by the X-ray diffraction analysis. By Raman scattering is confirmed the change of crystalline phase, of monoclinic to triclinic, since that lattice vibrational modes of as-deposited WO3and annealed at 500°C present clearly differences. WO3band gap energy can be varied from 2.92 to 3.15 eV by annealing WO3from 0 to 500°C as was obtained by transmittance measurements. The photoluminescence response of the as-deposited film presents three radiative transitions observed at 2.85, 2.41, and 2.04 eV that could be associated with oxygen vacancies; the first one is shifted to higher energies as the annealing temperature is increased due to the change of crystalline phase of the WO3.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.