Characterization of the Lower Cretaceous Shale in Lishu Fault Depression, Southeastern Songliao Basin: Implications for Shale Gas Resources Potential

Abstract

Large thickness of shales over 180.0 m was developed in the source rocks of the Shahezi and Yingcheng formations in the Lishu Fault Depression. Moreover, the high amount of gas content and the total hydrocarbon value of gas logging in several boreholes illustrate that there is a great potential of shale gas resources in this region. Therefore, an integrated characterization of shales from the lower Cretaceous Shahezi and Yingcheng formations was provided to evaluate shale gas resources potential. The measurement results illustrated that the organic-rich shale samples with kerogen type Ⅱ during high to over thermal maturity had a higher content of brittle minerals (>50%) and clay mineral dominated by illite. The shales had a total porosity of 3.11–4.70%, a permeability of 1.24 × 10−3–1.52 × 10−3 μm2, and possessed pore types including dissolution pores, inter-layer pores of clay minerals, micro-fractures, intra-granular pores, and organic pores, which were dominated by micropores and mesopores (0.5–1.7 nm, 2.2–34.3 nm) with a significant contribution from OM and clay minerals. According to the N2 adsorption isotherms, the pore volume was comprised primarily of mesopores with mean widths of 4.314–6.989 nm, while the surface area was comprised primarily of micropores with widths in ranges of 0.5–0.8 nm and 1.0–1.7 nm. Thus, the shales have a suitable porosity and permeability, indicating that fine storage capacity and favorable gas flow capacity occur in the Shahezi and Yingcheng formations, which exhibit a good reservoir quality and excellent exploration potential since the considerable thickness of shales could form a closed reservoir and served as cap rocks for in situ gas generation and accumulation. Especially, according to the measured CH4 excess adsorption amount and the calculated maximum absolute adsorption capacities of CH4 based on the Langmuir adsorption model, the estimated GIP values (1.388–3.307 m3/t) of the shales happened to be in a sampling depth under geological hydrostatic pressure and temperature conditions. This means that the shale storage capacity and high gas content from well site desorption completely met the standard of industrial exploitation when synthetically considering the GIP model. As a consequence, shales in the Shahezi and Yingcheng formations in the Lishu Fault Depression could be potential targets for shale gas exploration.