Abstract
Tribology investigations were conducted to understand the effect of humidity and water adsorption at the interfacial surface on the friction coefficient of titanium. Pin-on-disk tribometer tests were conducted at different levels of humidity ranging from 0% to 71% RH using aluminum and steel pins on a titanium plate. The variation of the mean coefficient of friction was plotted as a function of relative humidity. The friction coefficient slightly decreased when the relative humidity was increased from 0% to 10% RH. However, it increased with a further increase in humidity. The maximum friction coefficients were observed at 55% and 65% RH for steel and aluminum, respectively. The thickness of the wear tracks also showed the same trend as the friction coefficient. Under high humidity conditions, water vapor can condense on the surface of the moving machine parts. To understand the influence of this water film, a pin-on-disk test was carried out on a sample where a thin film of water masks metal surfaces from contact. Although the coefficient of friction was similar for both the aluminum and steel pins’ interaction with titanium (~0.36), the wear tracks were not formed for steel pin/titanium interaction even though this experiment was conducted for more cycles.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
