Abstract
CuO/γ-Al2O3 catalyst was used to deal with the waste leachate in CWAO technology of, and the SEM and TEM characterization showed: active component in the surface of the carrier distribution is uniform; In CWAO process, six factors, based on the CODCr removal rate and turbidity removal rate, the biggest impact factor is reaction temperature, and the influence factors of the top three were reaction temperature, catalyst dosage and reaction time. The influence factors of those in the bottom three are influent water pH, oxygen partial pressure, stirring intensity, and three factors of influence on the strength is close. Optimizing operation process, in order: reaction temperature of 200 °C, catalyst dosage of 1.5 g, oxygen partial pressure of 2.0 MPa, stirring intensity 800 rpm, influent water pH of 7.0, the reaction time of 70 min.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
