Characteristics of supercritical heat transfer during filmboiling of nanofluids on a vertical heated wall

Abstract

Nanofluid using for intensification of heat transfer during boiling are analyzed. The using boiling nanofluids for cooling high-temperature surfaces allows significantly intensify heat transfer process by increasing the heat transfer coefficient of a nanofluid in comparison with a pure liquid. The properties of nanoparticles, their concentration in the liquid, the underheating of the liquid to the saturation temperature have significant effect on the rate of heat transfer during boiling of the nanofluid. Increasing critical heat flux during boiling of nanofluids is associated with the formation of deposition layer of nanoparticles on heated surface, which contributes changing in the microcharacteristics of heat exchange surface. An increase in the critical heat flux during boiling of nanofluids is associated with the formation of a layer of deposition of nanoparticles on the surface, which contributes to a change in the microcharacteristics of the heat transfer of the surface. Mathematical model and results of calculation of film boiling characteristics of nanofluid on vertical heated wall are presented. It is shown that the greatest influence on the processes of heat and mass transfer during film boiling of the nanofluid is exerted by wall overheating, the ratio of temperature and Brownian diffusion and the concentration of nanoparticles in the liquid. The mathematical model does not take into account the effect changing structure of the heated surface on heat transfer processes but it allows to evaluate the effect of various thermophysical parameters on intensity of deposition of nanoparticles on heated wall. The obtained results allow to evaluate the effect of nanofluid physical properties on heat and mass transfer at cooling of high-temperature surfaces. The using nanofluids as cooling liquids for heat transfer equipment in the regime of supercritical heat transfer promotes an increase in heat transfer and accelerates the cooling process of high-temperature surfaces. Because of low thermal conductivity of vapor in comparison with the thermal conductivity of the liquid, an increase in the concentration of nanoparticles in the vapor contributes to greater growth in heat transfer in the case of supercritical heat transfer.