Abstract
To prepare for the initial configuration of the Nokia appliance, one needs a workstation, laptop, or VT100-capable terminal that one can directly connect to the Nokia using a console cable or perhaps indirectly through a standard Ethernet connection. If one is configuring the Nokia appliance using the DHCP method, one will only need a standard Ethernet connection. Nokia supplies a DB-9 serial cable with all its devices. This cable allows for console connections from properly configured clients. If one does not have one of the Nokia cables, one can always use a standard null-modem cable for the serial connection. One can directly connect a crossover cable from the workstation to any Ethernet port on the Nokia device, or can indirectly connect a straight-through cable from the workstation to a hub or switch and from there to the appliance over another straight-through cable. The standard installation procedure is a five-step process. One must power on the appliance and enter the boot manager, initiate the installation process, answer the configuration questions, reboot the appliance, and then continue with the initial configuration steps.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
