Abstract

Numerical investigations of hydrodynamics and kinetic reactions in a fluidized bed methanation reactor are carried out by coupling methanation kinetics with the two-fluid flow model. The gas–solid reacting flow models are implemented within OpenFOAM software. The grid resolution is investigated using two-dimensional and three-dimensional (2D and 3D) meshes. The bed height is reasonably predicted with the Gidaspow and Syamlal models. Simulated results are compared against experimental data in the literature. The simulated axial species concentrations agree well with the measured results at the end of the bed. The effects of different operating parameters are evaluated using the established models. The increase in the gas inlet velocity results in more dilute solid concentration and larger bed expansion. The weak bed expansion results from the methanation reaction with gas volume reduction. The methane concentration is increased when increasing catalyst inventory in the reactor. The addition of water into t...

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.