Cellulose Nanocrystals vs. Cellulose Nanofibers: A Comparative Study of Reinforcing Effects in UV-Cured Vegetable Oil Nanocomposites.

Abstract

There is an opportunity to use nanocellulose as an efficient renewable reinforcing filler for polymer composites. There have been many investigations to prove the reinforcement concept of different nanocellulose sources for thermoplastic and thermoset polymers. The present comparative study highlighted the beneficial effects of selecting cellulose nanofibers (CNFs) and nanocrystals (CNCs) on the exploitation properties of vegetable oil-based thermoset composite materials—thermal, thermomechanical, and structural characteristics. The proposed UV-light-curable resin consists of an acrylated epoxidized soybean oil polymer matrix and two different nanocellulose reinforcements. High loadings of up to 30 wt% of CNFs and CNCs in irradiation-cured vegetable oil-based thermoset composites were reported. Infrared spectroscopy analysis indicated developed hydrogen-bonding interactions between the nanocellulose and polymer matrix. CNCs yielded a homogeneous nanocrystal dispersion, while CNFs revealed a nanofiber agglomeration in the polymer matrix, as shown by scanning electron microscopy. Thermal degradation showed that nanocellulose reduced the maximum degradation temperature by 5 °C for the 30 wt% CNC and CNF nanocomposites. Above the glass transition temperature at 80 °C, the storage modulus values increased 6-fold and 2-fold for the 30 wt% CNC and CNF nanocomposites, respectively. In addition, the achieved reinforcement efficiency factor r value for CNCs was 8.7, which was significantly higher than that of CNFs of 2.2. The obtained nanocomposites with enhanced properties show great potential for applications such as UV-light-processed coatings, adhesives, and additive manufacturing inks.