Abstract
A microscopic cellular automaton combined with macroscopic heat and solute transport was developed to simulate the mutual growth and evolution of austenite and M7C3 carbide grains during Fe-C-Cr ternary alloy solidification process. The diffusion of solute C and Cr are contributed together to the constitutional undercooling, together with curvature undercooling, for obtaining the grain growth rate of austenite and M7C3 carbide. Results show that, the absorption of solute C and Cr by M7C3 grain and rejection by austenite grain promote the two grains’ cooperative growth. Once they approach to each other, the austenite grain quickly overgrows towards the M7C3 grain till finally envelops it. The simulated solidification morphology of the Fe-4wt%C-17wt%Cr alloy, predicted averaged grain size of M7C3 carbides and C and Cr concentration in austenite grains agree with the experimental measurements and solidification path prediction. The predicted average liquid concentration curve fits with the LR, GS and PE prediction at the initial M7C3 precipitation regime and after austenite grains fully enveloping towards the M7C3 grains, returns to overlap the LR, GS and PE prediction curves.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
